Deep Beeswax Foundation - Wired With Hooks - 8 3/8-inch

The Deep Beeswax Foundation - Wired With Hooks - 8 3/8-inch is a sheet of 100% pure beeswax foundation with ten vertical embedded brass support wires. The hooked top edge extends past the wax so it can be secured under the wedge of a deep frame, helping keep the foundation straight and well supported.

At a glance

• Type: Wired beeswax deep foundation
• Material: 100% pure capping beeswax
• Wires: 10 vertically embedded brass support wires
• Top edge: Hooks fit behind the wedge of the top bar
• Cell size: 5.4 mm
• Dimensions: 8-1/2 in x 16-3/4 in, about 2.2 oz wax
• Fits: Deep wedge top / split bottom bar frames

Best for

• The brood nest in deep frames
• Beekeepers who prefer pure wax over plastic
• Cross-wired frames needing extra comb support
• Encouraging natural, clean comb development

How to use

Hook the top edge behind the wedge of a deep wedge top / split bottom frame to hold the sheet in place. For best results in deep frames, cross-wire the wooden frame to add support as bees draw out comb and to prevent sagging in warm weather. For an easier install with a wax-rich surface, consider double-waxed plastic foundation instead.

Cold weather shipping: foundation can freeze and become brittle below 38 degrees F. To have wax held until temperatures rise above 40 degrees F, leave a note at checkout. Shipment in colder conditions is at the buyer's risk, and returns are not accepted for frozen or crumbled foundation.

About Foxhound Bee Company

Foxhound Bee Company is a beekeeping supplier offering wax foundation, frames, and assembly tools for beekeepers at every level.

Sold by Foxhound Bee Company, based in Irondale, Alabama.